• The Melvin

  • $ 1,505.00

  • Next Product →
  • Description

    Introducing the Melvin.  The heart of becoming energy self-reliant.  The Melvin Engine runs off of heat.  Heat created by wood, propane, natural gas, solar, and bio fuel.  The engine converts the heat energy to rotary motion that turns a generator to generate electricity.  As some of us like to say - "put the wood in one end and electricity comes out the other".

    The engine is designed to operate with a temperature difference of about 600 degrees F.  The output of the engine is targeted at 1 KW at maximum pressure and temperature.  Outputs exceeding 200 W can be obtained using lower temperatures without any pressurization of the engine.

    The engine works in conjunction with our Fire Boxes (propane or wood).  The hot end of the engine is placed in the hot Fire Box causing it to run (it must be warmed up and hand started).   The engine can be utilized with any heat source.  You do not have to use our Fire Boxes.  You can install the engine into a wood stove or a fireplace.  There is no exhaust from the engine itself.   The engine is 8' long, about 24" in diameter and weighs aprox 200 lbs.

    The engine is designed to last for many years with very little maintenance.  There are no spark plugs, air filters, oil, or batteries.  

    Join the future of energy production and purchase your Melvin Engine today.

    With our engine generate electricity, using wood, gas, solar to run the Melvin Engine.  Some assembly is required, open end wrench, screwdriver and allen key wrench are needed for assembly.  Estimated time of assembly is 1-2 hrs.

    Delivery currently estimated at 30-45 days from order( - shipping charges are additional (estimated $200).

     

    *** Note:  Water Jacket is not included with Base Engine - it is included with The Melvin Package or as a separate accessory.

     

    Specifications:

    Size:  

    108 inches Long x 24 inches Wide  x 33 inches High (Engine Hot End = 30" long  x  x 12 wide)

    Weight:  

    200 lbs (flywheel makes up 50lbs of that) - Dry weight

    Operating Temperature:  

    Hot End - Min 600F, Max 900 F  Cold End -Max 150 F

    Engine Speed (at 500 F temperature difference):

    110 RPM (un-pressurized ),

    +8 RPM for each +5PSI(gage pressure)

    Engine Power Output:  

    Un-pressurized 200W -

    Pressurized (estimated max of 1.2KW at 24PSI & 150 RPM) 

    Output @ 12V or 24V (engine ships with gearing for both)

     

     

     

     

The Melvin

Share this product